| P-59 Airacomet | |
|---|---|
| Bell P-59B Airacomet at the National Museum of the United States Air Force, Dayton, Ohio. | |
| Role | Fighter |
| Manufacturer | Bell Aircraft |
| Designer | Harland M. Poyer |
| First flight | 1 October 1942 |
| Primary users | United States Army Air Forces United States Navy Royal Air Force |
| Number built | 66 |
The Bell P-59 Airacomet was the first American jet fighter aircraft, designed and built during World War II. The United States Army Air Forces was not impressed by its performance and cancelled the contract when fewer than half of the aircraft ordered had been produced. Although no P-59s went into combat, it paved the way for another design generation of U.S. turbojet-powered aircraft and was the first turbojet fighter to have its turbojet engine and inlet nacelles integrated within the main fuselage.
Contents |
Major General Henry H. "Hap" Arnold became aware of the United Kingdom's jet program when he attended a demonstration of the Gloster E.28/39 in April 1941. The subject had been mentioned, but not in depth, as part of the Tizard Mission the previous year. He requested, and was given, the plans for the aircraft's powerplant, the Power Jets W.1, which he took back to the U.S. On 4 September, he offered the U.S. company General Electric a contract to produce an American version of the engine. On the following day, he approached Lawrence Dale Bell, head of Bell Aircraft Corporation, to build a fighter to utilize it. Bell agreed and set to work on producing three prototypes. As a disinformation tactic, the USAAF gave the project the designation "P-59A", to suggest it was a development of a completely unrelated Bell "XP-59" fighter project that had been canceled. The design was finalized on 9 January 1942, and construction began. In March, long before the prototypes were completed, an order for 13 "YP-59A" pre-production machines was added to the contract.
On 12 September 1942, the first XP-59A was sent to Muroc Army Air Field (today, Edwards Air Force Base) in California by train for testing, taking seven days to reach Muroc.[1] While being handled on the ground, the aircraft was fitted with a dummy propeller to disguise its true nature.[2] The aircraft first became airborne during high-speed taxiing tests on 1 October with Bell test pilot Robert Stanley at the controls, although the first official flight was made by Col Laurence Craigie the next day.[1] A handful of the first Airacomets had open-air flight observer stations later cut into the nose a'la biplanes; over the following months, tests on the three XP-59As revealed a multitude of problems including poor engine response and reliability (common shortcomings of all early turbojets), insufficient lateral stability, i.e., in the roll axis,[3] and performance that was far below expectations. Chuck Yeager flew the aircraft and was dissatisfied with the speed, but was amazed at the smooth flying. Nevertheless, even before delivery of the YP-59As in June 1943, the USAAF ordered 80 production machines, designated "P-59A Airacomet".
The 13 service test YP-59As had a more powerful engine than its predecessor, but the improvement in performance was negligible with only a five mph increase in top speed and a decrease in service-before-overhaul time. One of these aircraft, the third YP-59A (S/n: 42-22611) was supplied to the Royal Air Force (RAF), becoming RG362/G, in exchange for the first production Gloster Meteor I, EE210/G.[4] British pilots found that the aircraft compared very unfavorably with the jets that they were already flying. (The YP-59A also compared unfavorably to the propeller-driven P-51 Mustang.) Two YP-59A Airacomets (42-108778 and 42-100779) were also delivered to the U.S. Navy where they were evaluated as the "YF2L-1" but quickly found completely unsuitable for carrier operations.
Faced with their own ongoing difficulties, eventually, Bell completed 50 production Airacomets, 20 P-59As and 30 P-59Bs. Each was armed with one 37 mm M4 cannon and 44 rounds of ammunition and three .50 cal. machine guns with 200 rounds per gun. The P-59Bs were assigned to the 412th Fighter Group to familiarize AAF pilots with the handling and performance characteristics of jet aircraft.[5] By 1950 all examples of the Airacomet were no longer airworthy. Over time, disposal of the aircraft included use as static displays, instructional aids in military training and use as static targets. While the P-59 was not a great success, the type did give the USAAF experience with the operation of jet aircraft in preparation for the more advanced types that would shortly become available.[6]
Six P-59s are known to survive today.
Data from The American Fighter[13]
General characteristics
Performance
Armament
|
||||||||||||||||||||||||||
|
||||||||||||||
|
||||||||||||||